How To Grind A Deep Hole Drill Correctly?

1. Stop the bed when adjusting the speed, stroke, clamping tools and workpieces of the deep hole drilling machine, and when wiping the CNC lathe.

2. Use radial drills and deep hole drills. Obstacles are prohibited within the swivel range of the cross arm, and floating objects are prohibited from the cross arm and operating table.

3. When long iron chips are wound on the drill, the specifications and models of the deep hole drill must be cleaned if it is stopped. It is strictly forbidden to blow with the mouth. The picture of the deep hole drill should be cleaned by hand with a soft brush or iron hook.

4. After the deep hole drilling machine is started, it is forbidden to touch the moving workpiece, CNC blade and transmission part, and it is strictly forbidden to transfer or take tools and other items through the rotating part of the CNC lathe.

5. The feed rate must be selected for fully automatic tool feed, and the stroke limit block must be adjusted. Manual feed is usually carried out according to the standard of slowly increasing and reducing pressure to prevent anquan accidents caused by excessive force.