
Mini Manual Block Molding Equipment for Building Construction
New grade GY70 and GY83 is better supported by the new generation of Si, with Cr, with Al PVD coating.
Description
In line with the service tenet of sharing and transparency, buyers can quickly find excellent quality and genuine turbine cutting tool, indexable drill mills, simtek tools on the Internet. We always pay attention to the problems and new requirements of customers in cooperation with us, and take this opportunity to improve our products and services. We always adhere to the quality-oriented, your satisfaction is our unremitting pursuit.
Insert Introduction
New grade GY70 and GY83 is better supported by the new generation of Si, with Cr, with Al PVD coating. Then the wear performance, durability and stability of the tools have been greatly improved; TiAlN nano PVD coating with high resistance and high oxidation resistance

Cutting Parameter Recommendation | |
Component | Cast iron,ductile cast iron,Φ55mm,Hardness:HB220~290 |
Cutting depth(mm) | (single edge)2~4 |
Cutting Speed(m/min) | 150~220 |
Feed Speed(m/min) | 0.2~1.0 |
Major Product’s Technical Parameter
| ||||||
Order No. | Dimension (mm) | Grade | ||||
d | s | d1 | r | GY7085 | GY83 | |
HNHX1006ANTN-M | 21 | 4.3 | 5.65 | 1.7 | ● | ○ |
| ||||||
Order No. | Dimension (mm) | Grade | ||||
L1 | L2 | s | d1 | GY7085 | GY83 | |
XNE120608 | 12.7 | 12.3 | 6.35 | 4.4 | ● | ○ |
| |||||||
Order No. | Dimension (mm) | Grade | |||||
L1 | L2 | s | d1 | r | GY7026 | GY83 | |
21-002176-100-1 | 15.572 | 9.525 | 7.94 | 4.2 | 1.2 | ● | ○ |
| |||||||
Order No. | Dimension (mm) | Grade | |||||
L1 | L2 | s | d1 | r | GY7026 | GY83 | |
21-002050-100-1 | 12.7 | 9.525 | 4.76 | 4.4 | 4 | ● | ○ |
| |||||||||
Order No. | Dimension (mm) | Grade | |||||||
L1 | L2 | L3 | s | d1 | r1 | r2 | GY7094 | GY83 | |
E-17628-10-A | 15.88 | 9.525 | 11.84 | 7.94 | 4.4 | 0.8 | 2.5 | ● | ○ |
Customer’s Case



Through continuous innovation and change, we are unanimously recognized and trusted by many customers at home and abroad. If you need Mini Manual Block Molding Equipment for Building Construction, please contact us in time, we will do our best to help you! We aim to build harmonious labor relations with the characteristics of the new era, and hope to inject a strong impetus into the development of the enterprise. We rely on our own advantages, closely follow the market trend, continue to introduce new products, and actively carry out international trade.
Hot Tags: forming inserts for engine crankcases, China, suppliers, manufacturers, factory, buy, price, Round Threading Inserts, beveling machine insert, deep hole drilling, pcbn insert, pcd turning tool, od grooving insert
[[ProKeywords]]















