The key technology of deep hole cutter

Now what our deep-hole tool manufacturer wants to introduce to you is a key technological point that cannot be ignored in the production of deep-hole tools. We hope that through our introduction, we can better improve the quality of your products. Let’s take a closer look, as follows :

First, we need to understand that because the deep hole processing environment is relatively small for milling and turning, the chip space is small, the chip removal, heat dissipation, and cooling effects are poor, and the system rigidity is poor. Therefore, the structure design and operation process fully consider the above unfavorable factors for the processing technology. Impact.

In addition, for occupancy machining, a occupant guide sleeve or a prefabricated guide hole at the front end of the workpiece should be equipped. The coolant is good to choose vulcanized cutting oil to extend the service life of the tool and ensure the quality of processing. The cutting amount depends on the occupied hole diameter, the material of the workpiece, the heat treatment condition of the workpiece, and the rigidity of the machine tool system used. Suggestion: V=70M/min S=0.1-0.3/r, the last thing to note is that the cutting process is not allowed to stop or interrupt the coolant. The machine tool is not allowed to stay away from the machine tool if there is no alarm setting. Emergency measures can be taken to avoid damage to the machine tool, cutting tools, tool holders, and workpieces in the event of failure.